| Model Number |
C purlin, 80-300 |
| Suitable Material |
hot rolled strip steel, Q235 or equivalent, 1.5-3.0 mm thickness |
| Material Width |
175-465 mm |
| Dimension |
about 10.0*1.2*1.75 m (L*W*H) |
| Working Space |
about 20.0*2.7 m (L*W) |
| Length Of Sheet |
You can set the length according to your need, such as 1.5m, 3.2m or 6.7m. It is controlled by PLC, and can ensure the accuracy of 2mm. |
| Cutting |
Automatically stop and cutting when it comes to the set length |
| Forming Speed |
0-15 m/min |
| b. Components Details |
| Material |
Gr15. Treating process: rough turning-quenching, 62-64,C-finish turning-accurate grinding- polishing- hard chrome plating, 0.05 mm |
| Main Frame |
400 H steel. More stable, no shaking |
| Middle Plate |
20 mm. we use bigger plates, to ensure stability |
| Chain |
2 inch thickness |
| Shaft Material |
80 mm, high grade 45# steel. Treating process: tempering- finish turning, high rigidity, hard to deform. |
| Forming Steps |
13 |
| Detailed Forming Process |
3 steps for leveling- 12 steps for roll forming-5 steps for adjusting height and width-1 step on the coil-output part for adjusting deviation-1 leveling step to make it straight. |
| Mold Cutting |
Cr12, hardness HRC60-62. Treating process: heat treatment- plane abrasion- wire electrode cutting |
| Control System |
Suitable power: 380V, 50 Hz, 3 phase or according to your need. |
| Screen: Delta 7 inch touch screen, easy to operate |
| PLC: Delta DVP24ES, well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
| Frequency converter, Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy ( 1mm, far better than industrial standard 3mm). |
| Length measurement device: Omron, made in Japan. It features with high accuracy and stability |
